烟草地上部植株三维重构与可视化

doi:10.3864/j.issn.0578-1752.2013.01.005

摘要/Abstract

摘要： 【目的】实现烟草的数字化与可视化。【方法】本文采用模板技术对烟草植株进行三维重构，首先通过三维数字化仪对烟草器官进行测量和形态特征提取，然后基于形态结构特征分别建立了烟草叶片、花朵、果实和茎节等器官的参数化几何模型，保存为模板文件，最后调用相应的模板文件，结合图形变换方法拼接成完整植株几何模型。【结果】利用本文方法可方便构造烟草各主要时期的三维模型。【结论】所建立的烟草植株几何模型具有较高的真实感，为其三维形态交互设计和可视化模拟提供了技术支撑。

关键词: 烟草 , 器官建模 , 模板技术 , 三维重构 , 可视化

Abstract: 【Objective】The objective of this study is to realize the digitization and visualization of tobacco. 【Method】 In this paper, the template technique was used for three-dimensional reconstruction of the tobacco plant and visualization. The measured data of tobacco organic were firstly obtained using 3D digital instrument and image processing; then the simulation for tobacco leaves, flowers, fruit and stems were realized accordingly to different parametric descriptions based on morphological characteristics, and saved them as template files. At last, the complete model was constructed with graphical transformation operations on them. 【Result】 Using this method can facilitate the construction of the major periods of tobacco with 3D model.【Conclusion】 The result shows that the tobacco model rebuilt by this method has more reality, which offers a technique support for its iteraction design and visualized simulation.

Key words: tobacco , organic modeling , template , three-dimensional geometric morphological modeling , visualization

王芸芸, 温维亮, 郭新宇, 赵国辉, 陆声链, 肖伯祥. 烟草地上部植株三维重构与可视化[J]. 中国农业科学, 2013, 46(1): 37-44.

WANG Yun-Yun, WEN Wei-Liang, GUO Xin-Yu, ZHAO Guo-Hui, LU Sheng-Lian, XIAO Bo-Xiang. Research on Three-Dimensional Reconstruction and Visualization of Above-Ground Tobacco Plant[J]. Scientia Agricultura Sinica, 2013, 46(1): 37-44.

0
/ / 推荐

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: https://www.chinaagrisci.com/CN/10.3864/j.issn.0578-1752.2013.01.005

https://www.chinaagrisci.com/CN/Y2013/V46/I1/37

参考文献

[1]赵春江, 陆声链, 郭新宇, 肖伯祥, 温维亮. 数字植物及其技术体系探讨. 中国农业科学, 2010, 43 (10): 2023-2030.

Zhao C J, Lu S L, Guo X Y, Xiao B X, Wen W L. Exploration of digital plant and its technology system. Scientia Agricultura Sinica, 2010, 43(10): 2023-2030. (in Chinese)

[2]温维亮, 郭新宇, 陆声链, 肖伯祥, 赵春江. 曲面建模方法在数字植物中的应用与展望. 中国农业科学, 2011, 44(7): 1338-1345.

Wen W L, Guo X Y, Lu S L, Xiao B X, Zhao C J. Applications and prospects of surface modeling method in digital plant. Scientia Agricultura Sinica, 2011, 44(7): 1338-1345. (in Chinese)

[3]Guo Y, Fourcaud T, Jaeger M, Zhang X P, Li B G. Plant growth and architectural modeling and its applications. Annals of Botany, 2011, 107(5): 723-727.

[4]Sievänen R, Nikinmaa E, Nygren P, Ozier-Lafontaine H, Perttunen J, Hakula H. Components of funtional-structural tree models. Annals of Forest Science, 2000, 57: 399-412.

[5]Hu B G, de Reffye P, Zhao X, Yan H P, Kang M Z. GreenLab: A new methodology towards plant functional-structural model structural aspect//Conference Proceedings of Plant Growth Modeling and Applications (PMA'03). Beijing, China: Tsinghua University Press and Springer, 2003: 21-35.

[6]Cieslak M, Seleznyova A N, Hanan J. A functional-structural kiwifruit vine model//Conference Proceedings of Plant Growth Modelling and Applications(PMA’09). Beijing, China: Tsinghua University Press and Springer, 2009: 206-213.

[7]展志岗, 王一鸣, Philippede Reffy, 胡包钢. 冬小麦植株生长的形态构造模型研究. 农业工程学报, 2001, 17(5): 6-10.

Zhan Z G, Wang Y M, de Philippe R, Hu B G. Morphological architecture-based growth model of winter wheat. Transactions of the Chinese Society of Agicultural Engineering, 2001, 17(5) : 6-10. (in Chinese)

[8]张吴平, 郭焱, 李保国. 小麦苗期根系三维生长动态模型的建立与应用.中国农业科学, 2006, 39(11): 2261-2269.

Zhang W P, Guo Y, Li B G. Development and application of three-dimensional growth model of root system in wheat seedling. Scientia Agricultura Sinica, 2006, 39(11) : 2261-2269. (in Chinese)

[9]郭新宇, 赵春江, 肖伯祥, 邓旭阳, 孙广宇, 王纪华. 玉米三维重构及可视化系统的设计与实现. 农业工程学报,2007, 23(4): 144-148.

Guo X Y, Zhao C J, Xiao B X, Deng XY, Sun G Y, Wang J H. Design and implementation of three-dimensional geometric morphological modeling and visualization system for maize. Transactions of the Chinese Society of Agricultural Engineering, 2007, 23(4):144-148. (in Chinese)

[10]赵春江, 王功明, 郭新宇, 陈立平, 王纪华. 基于交互式骨架模型的玉米根系三维可视化研究. 农业工程学报, 2007, 23(9): 1-6.

Zhao C J, Wang G M, Guo X Y, Chen L P, Wang J H. 3D visualization of corn root system based on interactive framework model. Transactions of the Chinese Society of Agricultural Engineering. 2007, 23(9): 1-6. (in Chinese)

[11]刘晓东, 曹云飞, 刘国荣, 胡昭. 基于NURBS曲面的水稻叶形态建模. 微电子学与计算机, 2004, 21(9) :117-119,124.

Liu X D, Cao Y F, Liu G R, Hu Z. The modeling of rice leaf based on NURBS. Microelectronics and Computer,2004,21(9):117-119,124. (in Chinese)

[12]石春林, 朱艳, 曹卫星. 水稻叶片几何参数的模拟分析. 中国农业科学, 2006, 39(5): 910-915.

Shi C L, Zhu Y, Cao W X. A simulation analysis on geometrical parameters of rice leaf blade. Scientia Agricultura Sinica, 2006, 39(5): 910-915. (in Chinese)

[13]熊淑萍, 马新明, 石媛媛, 席磊. 不同生育时期烟草生长与生态因子关系动态模拟模型研究. 河南农业大学学报, 2005, 39(3): 321-325.

Xiong S P, Ma X M, Shi Y Y, Xi L. Study on dynamic simulation model for the relationship between growth and environmental factors at different tobacco growth and development stage. Journal of Henan Agricultural University, 2005, 39(3): 321-325. (in Chinese)

[14]马新明, 杨娟, 熊淑萍, 席磊, 虎晓红. 烟草根系形态发育模拟模型. 中国农业科学, 2005, 38(21): 2421-2427.

Ma X M, Yang J, Xiong S P, X i L, Hu X H. A model for simulating root morphological development of tobacco. Scientia Agricultura Sinica, 2005, 38(21): 2421-2427. (in Chinese)

[15]Deussen O, Lintermann B. Digital Design of Nature: Computer Generated Plants and Organics. New York: Springer-Verlag, 2005.

[16]Ijiri T, Owada S, Igarashi T. Seamless integration of initial sketching and subsequent detail editing in flower modeling//Eurographics 2006, Vienna, Austria, 2006: 617-624.

[17]Ijiri T, Owada S, Igarashi T. The sketch L-System: Global control of tree modeling using free-form stroke//The 6th International Symposium SmartGraphics 2006. Vanvcouver, Canada, 2006: 138-146.

[18]Long Q, Ping T, Gang Z, Lu Y, Jingdong W, Sing B K. Image-based plant modeling. ACM Transactions on Graphics, 2006, 25(3): 599-604.

[19]Xu K H, Gossett N, Chen B. Knowledge-based modeling of laser-scanned trees//SIGGRAPH'05 Sketches. Los Angeles, CA, 2005: 124.

[20]王芸芸, 温维亮, 郭新宇, 赵国辉, 陆声链, 肖伯祥. 基于球B样条函数的烟草叶片虚拟实现. 农业工程学报, 2011, 27(1): 230-235.

Wang Y Y, Wen W L, Guo X Y, Zhao G H, Lu S L, Xiao B X. Virtual realization of tobacco leaves based on ball B-spline function. Transactions of the Chinese Society of Agricultural Engineering, 2011, 27(1): 230-235. (in Chinese)

[21]王芸芸, 温维亮, 郭新宇, 赵国辉, 陆声链, 肖伯祥. 烟草花几何建模研究. 农业机械学报,2011,42(4): 163-167, 173.

Wang Y Y, Wen W L, Guo X Y, Zhao G H, Lu S L, Xiao B X. Geometric modeling of tobacco flower. Transactions of the Chinese Society for Agricultural Machinery, 2011, 42(4): 163-167, 173. (in Chinese)

[22]王芸芸, 温维亮, 郭新宇, 赵国辉, 肖伯祥, 陆声链. 基于分形系统的烟草花序可视化仿真研究. 农机化研究, 2011, 33(8): 51-54, 58.

Wang Y Y, Wen W L, Guo X Y, Zhao G H, Xiao B X, Lu S L. Reasearch on fractal based visualized simulation of tobacco inflorescence. Journal of Agricultural Research, 2011, 33(8): 51-54, 58. (in Chinese)

[23]王德吉, 李同泉, 栗卫军. 虚拟烟草生长模型. 现代农业科技,2008(15): 208-211.

Wang D J, Li T Q, Li W J. Growth model of virtual tobacco. Modern Agricultural Science and Technology, 2008(15): 208-211. (in Chinese)

[24]郭月清. 烤烟栽培技术. 北京: 金盾出版社,1992.

Guo Y Q. Postgraduate Cultivation Technology. Beijing: Golden Shield Press, 1992. ( in Chinese)

[25]温维亮, 郭新宇, 肖伯祥, 陆声链, 杜建军. 基于模板的生菜参数化几何建模方法. 中国农学通报, 2011, 27(6): 459-463.

Wen W L, Guo X Y, Xiao B X, Lu S L, Du J J. The parametric geometric modeling method for lettuce based template. Chinese Agricultural Science Bulletin, 2011, 27(6): 459-463. (in Chinese)

[26]赵春江, 陆声链, 郭新宇, 李长锋, 杨月英. 西瓜三维形态几何建模和真实感绘制技术研究. 中国农业科学, 2008, 41(12): 4155-4163.

Zhao C J, Lu S L, Guo X Y, Li C F, Yang Y Y. Techniques for modeling 3D shape and realistic rendering of watermelon. Scientia Agricultura Sinica, 2008, 41(12): 4155-4163. (in Chinese)

Metrics

Viewed

Full text

301

HTML			PDF

Just accepted	Online first	Issue	Just accepted	Online first	Issue
0	0	0	0	0	301

Abstract

Cited

Shared