中国农业科学 ›› 2010, Vol. 43 ›› Issue (5): 1017-1022 .doi: 10.3864/j.issn.0578-1752.2010.05.017

• 贮藏·保鲜·加工 • 上一篇    下一篇

燕麦全粉挤压膨化产品质量评价的性状分析

宁更哲,魏益民,张波,师俊玲,胡新中,张丙虎

  

  1. (西北农林科技大学食品科学与工程学院)
  • 收稿日期:2009-07-31 修回日期:2009-10-26 出版日期:2010-03-01 发布日期:2010-03-01
  • 通讯作者: 魏益民

Analysis on Quality Properties of Product Evaluation Extruded from Whole Oat Flour

NING Geng-zhe, WEI Yi-min, ZHANG Bo, SHI Jun-ling, HU Xin-zhong, ZHANG Bing-hu
  

  1. (西北农林科技大学食品科学与工程学院)
  • Received:2009-07-31 Revised:2009-10-26 Online:2010-03-01 Published:2010-03-01
  • Contact: WEI Yi-min

摘要:

【目的】确定燕麦全粉挤压膨化产品质量性状的相对重要性,初步构建产品质量评价指标体系。【方法】以单因子燕麦全粉挤压膨化试验样品为分析材料,采用基本统计量分析、相关性分析和因子分析法,研究燕麦全粉挤压膨化食品质量性状变异程度及相关关系,并为主要质量性状赋予权重。【结果】由基本统计量分析可知,燕麦全粉挤压膨化产品质量性状中变异系数大于5.00%的有:a*、脆度、硬度、水溶性指数(WSI)、膨化率;由相关性分析可知,变异系数小于5.00%的质量性状至少与变异系数大于5.00%的质量性状中的一个指标存在显著相关性;变异系数大于5.00%的质量性状因子分析显示,膨化率、a*、脆度和硬度的方差贡献率分别为20.21%、24.21%、25.77%和24.56%。【结论】燕麦全粉挤压膨化产品主要质量性状构成及权重为:膨化率(21%)、a*(26%)、脆度(27%)和硬度(26%)。

关键词: 燕麦, 燕麦全粉, 膨化产品, 质量评价, 数量关系

Abstract:

【Objective】To compare relative importance of quality properties of expansion products extruded from whole oat flour, and found the quality evaluation indexes system. 【Method】 The quality properties of samples obtained from the single factor experiments were studied by descriptive analysis, correlation and factor analysis to study the variance, correlation, and put weights on main quality properties. 【Result】 Based on the descriptive analysis, the coefficient of variation (CV) of quality properties, such as a*, crispness, hardness, water solubility index (WSI) and expansion ratio were more than 5.00%. Based on the correlation analysis, at least one index whose CV were less than 5.00% had significant correlation with those whose CV were more than 5.00%. Based on the factor analysis, the variance contribution of expansion ratio, a*, crispness,and hardness were 20.21%, 24.21%, 25.77% and 24.56%, respectively. 【Conclusion】 Main quality properties of evaluating extruded expansion products from whole oat flour were expansion ratio, a*, crispness and hardness, and corresponding weight of main quality properties were 21%, 26%, 27% and 26%.

Key words: oat (Avena sativa L.), whole oat flour, expansion products, quality evaluation, quantity relation