Exploring the effects of sowing date and ecological points on the yield of semi-winter wheat is of great significance.  This study aims to reveal the effects of sowing date and ecological points on the climate resources associated with wheat yield in the Rice–Wheat Rotation System.  With six sowing dates, the experiments were carried out in Donghai and Jianhu counties, Jiangsu Province, China using two semi-winter wheat varieties as the objects of this study.  The basic seedlings of the first sowing date (S1) were planted at 300×10⁴ plants ha⁻¹, which was increased by 10% for each of the delayed sowing dates (S2–S6).  The results showed that the delay of sowing date decreased the number of days, the effective accumulated temperature and the cumulative solar radiation in the whole growth period.  The yields of S1 were higher than those of S2 to S6 by 0.22–0.31, 0.5–0.78, 0.86–0.98, 1.14–1.38, and 1.36–1.59 t ha^–1, respectively.  For a given sowing date, the growth days increased as the ecological point was moved north, while both mean daily temperature and effective accumulative temperature decreased, but the cumulative radiation increased.  As a result, the yields at Donghai County were 0.01–0.39 t ha^–1 lower than those of Jianhu County for the six sowing dates.  The effective accumulative temperature and cumulative radiation both had significant positive correlations with yield.  The average temperature was significantly negatively correlated with the yield.  The decrease in grain yield was mainly due to the declines in grains per spike and 1 000-grain weight caused by the increase in the daily temperature and the decrease in the effective accumulative temperature.

Dry direct-seeded rice (DDR) sown using a multifunctional seeder that performs synchronous rotary tillage and sowing has received increased attention because it is highly efficient, relatively cheap, and environmentally friendly.  However, this method of rice production may produce lower yields in a rice–wheat rotation system because of its poor seedling establishment.  To address this problem, we performed field experiments to determine the rice yield at five seedling density levels (B1, B2, B3, B4, and B5=100, 190, 280, 370, and 460 seedlings m⁻², respectively) and clarify the physiological basis of yield formation.  We selected a representative high-quality rice variety and a multifunctional seeder that used in a typical rice–wheat rotation area in 2016 and 2018.  The proportion of main stem panicle increased with increasing seedling density.  There was a parabolic relationship between yield and seedling density, and the maximum yield (9.34−9.47 t ha⁻¹) was obtained under B3.  The maximum yield was associated with a higher total spikelet number m⁻² and greater biomass accumulation from heading to maturity.  The higher total spikelet number m⁻² under B3 was attributed to an increase in panicle number m⁻² compared with B1 and B2.  Although the panicle numbers also increased under B4 and B5, these increases were insufficient to compensate for the reduced spikelet numbers per panicle.  Lower biomass, smaller leaf area, and lower N uptake per plant from the stem elongation stage to the heading stage were partially responsible for the smaller panicle size at higher seedling density levels such as B5.  The higher biomass accumulation under B3 was ascribed to the increases in the photosynthetic rate of the top three leaves m⁻² of land, crop growth rate, net assimilation rate, and leaf area index.  Furthermore, the B3 rice population was marked by a higher grain–leaf ratio, as well as a lower export ratio and transport ratio of biomass per stem-sheath.  A quadratic function predicted that 260−290 seedlings m⁻² is the optimum seedling density for achieving maximum yield.  Together, these results suggested that appropriately increasing the seedling density, and thereby increasing the proportion of panicles formed by the main stem, is an effective approach for obtaining a higher yield in DDR sown using a multifunctional seeder in a rice–wheat rotation system.

Mechanical pot-seedling transplanting is an innovatively developed transplanting method that has the potential to replace mechanical carpet-seedling transplanting.  However, the initial pot-seedling transplanting machine lacked optimized density spacing and limited yield potential for japonica rice.  Therefore, ascertaining the optimized density by wide-narrow rows and the appropriate transplanting method for yield formation and grain quality of japonica rice is of great importance for high-quality rice production.  Field experiments were conducted using two japonica rice cultivars Nanjing 9108 and Nanjing 5055 under three transplanting methods in 2016 and 2017: mechanical pot-seedling transplanting with wide-narrow row (K, average row spacing of 30 cm); equidistant row (D, 33 cm×12 cm); and mechanical carpet-seedling transplanting (T, 30 cm×12.4 cm).  In addition, five different density treatments were set in K (K1–K5, from 18.62×10⁴ to 28.49×10⁴ hills ha^–1).  The results showed that the highest yield was produced by a planting density of 26.88×10⁴ hills ha^–1 in mechanical pot-seedling transplanting with wide-narrow row with a greater number of total spikelets that resulted from significantly more panicles per area and slightly more grain number per panicle, as compared with equidistant row, and yield among density in wide-narrow row showed a parabolic trend.  Compared with mechanical carpet-seedling transplanting, the treatment of the highest yield increased yield significantly, which was mainly attributed to the larger sink size with improved filled-grain percentage and grain weight, higher harvest index, and increased total dry matter accumulation, especially the larger amount accumulated from heading stage to maturity stage.  With the density in wide-narrow row decreasing, processing quality, appearance quality, and nutrition quality were all improved, whereas amylose content and the taste value were decreased.  Compared with mechanical carpet-seedling transplanting, mechanical pot-seedling transplanting improved processing quality and nutrition quality, but decreased amylose content and deteriorated appearance quality.  These results suggested that mechanical pot-seedling transplanting with wide-narrow row coupling produced a suitable planting density of 26.88×10⁴ hills ha^–1 and may be an alternative approach to improving grain yield and quality for japonica rice.

Mechanical transplanting with carpet seedlings (MC) and mechanical direct seeding (MD) are newly developed planting methods, which increase in popularity and planted area each year. Knowing the difference for yield and rice quality under different planting methods is of great importance for the development of high quality and yield cultivation techniques under mechanical conditions. Therefore, three kinds of japonica rice including hybrid japonica rice, inbreed japonica rice, and soft rice were adopted as materials. And the differences in the quality of processing, appearance, cooking and eating quality, nutrition, and the rapid viscosity analyzer (RVA) profile were studied to reveal the effects of planting methods on yield and quality of different types of japonica rice. Results showed that the milled rice and head rice rates under MC was significantly higher than those under MD, and the processing quality of inbreed japonica rice was the most stable. Compared with MC, length/width ratio of rice under MD was significantly increased, and chalkiness rate, size, and degree were significantly decreased. The protein content under MD was lower than that under MC. MC showed higher peak viscosity and breakdown value than MD. The taste value was the greatest for soft rice, followed by inbreed japonica rice, and then by japonica hybrid rice, with no significant differences resulting from planting methods. Compared with MC, MD significantly improved the appearance quality, though processing quality and nutritional quality were decreased. And there was no significant difference in cooking and eating quality between MC and MD. Under different planting methods, the appearance quality of inbreed japonica rice changed the most and the processing quality was the most stable. The nutritional, cooking and eating quality of soft rice changed the least. Therefore, according to the different planting methods and market needs, selecting the appropriate rice varieties can reduce the risks in rice production and achieve good rice quality.

Mechanical transplanting has been applied to rice cultivation to save labor costs and ease labor shortages in Asian countries, especially in China.  However, little information is available related to the characteristics of agronomic performance when comparing inter-sub-specific hybrid rice (IHR) and inbred japonica rice (IJR) under mechanical transplanting method.  In 2013 and 2014, field experiments were conducted using IHR (Yongyou 2640) and IJR (Wuyunjing 24) under two cultivation patterns, that is, pot seedlings mechanically transplanted (PS) and carpet seedlings mechanically transplanted (CS).  Grain yield, yield components, leaf area index (LAI), leaf area duration (LAD), aboveground biomass, crop growth rate (CGR), nitrogen (N) uptake, and N accumulation were investigated.  When compared with CS, PS displayed significantly increased grain yield for both varieties because the larger sink size allowed higher N accumulation from panicle initiation to maturity.  Moreover, total aboveground biomass under PS increased significantly compared with that under CS; that is, higher photosynthetic productivity resulted from a greater LAI and higher LAD during the grain filling stage.  Higher N absorption capacity in the middle and late growth periods resulted in significantly enhanced total N uptake under PS.  When compared with IJR for both treatments, IHR generated 75.2% more grain yield.  However, the characteristics creating high yield of IHR were different from those of IJR.  Greater aboveground biomass production as well as higher N uptake and accumulation created higher grain yield in IHR than in IJR.  These results suggest higher yield could be achieved using PS with IHR, attributing to exploit both yield superiority and productive potential.

Several studies have demonstrated the effect of planting methods on rice yield, but information on the climate resources is limited.  This study aims to reveal the effects of planting methods on climate resources associated with rice yield in a rice-wheat rotation system in the lower reaches of the Yangtze River, China.  Field experiments were conducted in 2014 and 2015 with two japonica, two indica hybrid, and two japonica-indica hybrid varieties grown under three mechanized planting methods: carpet seedling of mechanical transplanting (CT), mechanical direct seeding (DS), and pot-hole seedling of mechanical transplanting (PT).  The rice yield and total This study was financially supported by grants from the Major Independent Innovation Project in Jiangsu Province, China (CX(15)1002), the Agricultural Science and Technology Innovation Fund in Jiangsu Province, China (CX(12)1003-09), the National Key Research Program of China (2016YFD0300503), the Science and Technology Plan of Jiangsu Province, China (BE2015340), the Research Innovation Program for College Graduates of Jiangsu Province, China (KYLX15_1369), and a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions, China.dry matter under PT were greater than those under CT and DS methods.  Besides, the entire growth duration and daily production showed significant positive relations with rice yield.  Compared with CT and DS, the effective accumulated temperature and cumulative solar radiation of rice under PT were higher in phenological phases.  In addition, the dry matter/effective accumulated temperature and solar energy utilization of rice under CT and DS were higher during vegetative phase and lower during reproductive and grain filling phases in contrast to PT.  The mean daily temperature and mean daily solar radiation in the entire growth duration showed significant positive correlation with rice yield, total dry matter, and harvest index.  This study demonstrated that when the mean daily temperature is <25.1°C in vegetative phase and >20.1°C in grain filling phase, rice yield could be increased by selecting mechanized planting methods.  Most varieties under PT method exhibited high yield and climate resources use efficiency compared with CT and DS.  In conclusion, the PT method could be a better cultivation measure for high rice yield, accompanied with high temperature and solar radiation use efficiency in a rice-wheat rotation system in the lower reaches of the Yangtze River, China.

     Understanding the differences in yield traits of rice among pothole seedling of mechanical transplanting (PSMT), carpet seedling of mechanical transplanting (CSMT) and mechanical direct seeding (MDS) is of great importance not only for rice scientists but also for rice farmers to develop a high-yield production system under mechanical conditions in a rice-wheat rotation system.  However, such traits are yet to be studied among rice varieties of japonica-indica hybrid rice (JIHR), japonica conventional rice (JCR) and indica hybrid rice (IHR).  Field experiments were conducted in 2014 and 2015, where six cultivars of the three rice types JIHR, JCR and IHR were grown individually with PSMT, CSMT and MDS methods, under respective managements for each method to achieve the maximum attainable yield.  Results showed that (i) the PSMT significantly increased grain yield of JIHR by 22.0 and 7.1%, of JCR by 15.6 and 3.7% and of IHR by 22.5 and 7.4%, compared to MDS and CSMT on average across the two years, respectively.  The highest yield was produced by the combination of JIHR and PSMT; (ii) high yield under PSMT was mainly attributed to large sink capacity and high-efficient dry matter accumulation.  With sufficient panicles per hectare, the increase of spikelet number per panicle, especially the increase in spikelet number of the secondary rachis-branches was determined to be the optimal approach for developing a large sink capacity for rice under PSMT.  The optimal tillers development, large leaf area index at heading stage, and high leaf area duration, crop growth rate and net assimilation rate during grain-filling phase could be the cause of sufficient dry matter accumulation for rice under PSMT; (iii) moreover, the PSMT favored plant growth as well as enriched the stems plus sheaths during grain-filling phase, as compared with CSMT and MDS.  These results suggest that PSMT may be an alternative approach to increasing grain yield in a rice-wheat rotation system in the lower reaches of the Yangtze River in China.

Although studies on the balance between yield and quality of japonica soft super rice are limited, they are crucial for super rice cultivation.  In order to investigate the effects of nitrogen application rate on grain yield and rice quality, two japonica soft super rice varieties, Nanjing 9108 (NJ 9108) and Nanjing 5055 (NJ 5055), were used under seven N levels with the application rates of 0, 150, 187.5, 225, 262.5, 300, and 337.5 kg ha^–1.  With the increasing nitrogen application level, grain yield of both varieties first increased and then decreased.  The highest yield was obtained at 300 kg ha^–1.  The milling quality and protein content increased, while the appearance quality, amylose content, gel consistency, cooking/eating quality, and rice flour viscosity decreased.  Milling was significantly negatively related with the eating/cooking quality whereas the appearance was significantly positively related with cooking/eating quality.  These results suggest that nitrogen level significantly affects the yield and rice quality of japonica soft super rice.  We conclude that the suitable nitrogen application rate for japonica soft super rice, NJ 9108 and NJ 5055, is 270 kg ha^–1, under which they obtain high yield as well as superior eating/cooking quality.

Late-maturity type of Yongyou japonica/indica hybrids series (LMYS) have shown great yield potential, and are being widely planted in the lower reaches of Yangtze River, China. Knowledge about suitable growing zone and evaluation of yield advantage is of practical importance for LMYS in this region. Fifteen LMYS, two high-yielding inbred japonica check varieties (CK-J) and two high-yielding hybrid indica check varieties (CK-I) were grown at Xinghua (119.57°E, 33.05°N) of Lixiahe region, Yangzhou (119.25°E, 32.30°N) of Yanjiang region, Changshu (120.46°E, 31.41°N) of Taihu Lake region, and Ningbo (121.31°E, 29.45°N) of Ningshao Plain in 2013 and 2014. The results showed that maturity dates of the 15 were later than the secure maturity date at Xinghua and 6, 14 and 15 LMYS were mature before the secure maturity date at Yangzhou, Changshu and Ningbo, respectively. One variety was identified as high-yielding variety among LMYS (HYYS) at Yangzhou, 8 HYYS in 2013 and 9 HYYS in 2014 at Changshu, 9 HYYS at Ningbo. HYYS here referred to the variety among LMYS that was mature before the secure maturity date and had at least 8% higher grain yield than both CK-J and CK-I at each experimental site. Grain yield of HYYS at each experimental site was about 12.0 t ha–1 or higher, and was significantly higher than CK varieties. High yield of HYYS was mainly attributed to larger sink size due to more spikelets per panicle. Plant height of HYYS was about 140 cm, and was significantly higher than check varieties. Significant positive correlations were recorded between duration from heading to maturity stage and grain yield, and also between whole growth periods and grain yield. HYYS had obvious advantage over check varieties in biomass accumulation and leaf area duration from heading to maturity stage. Comprehensive consideration about safe maturity and yield performance of LMYS at each experimental site, Taihu Lake region (representative site Changshu) and Ningshao Plain (representative site Ningbo) were thought suitable growing zones for LMYS in the lower reaches of Yangtze River. The main factors underlying high yield of HYYS were larger sink size, higher plant height, longer duration from heading to maturity stage and whole growth periods, and higher biomass accumulation and leaf area duration during grain filling stage.